Introduction
Whole-house Residential Energy Storage Solution for Luxury Villas
1. Product Overview
The HPIXP series high-voltage stackable all-in-one energy storage system is a premium whole-house energy storage solution designed for luxury villas, large detached houses and high-power residential applications.
The complete system integrates a 10KW hybrid inverter, high-voltage control unit, high-voltage LiFePO4 battery modules and mobile wheeled base into a modular stackable architecture. Users can flexibly combine battery modules according to household electricity consumption requirements and expand storage capacity in the future.
Equipped with brand-new Grade A lithium iron phosphate (LiFePO4) cells, the battery modules achieve more than 6000 charge-discharge cycles. The built-in intelligent BMS provides comprehensive protection against overcharging, over-discharging, short circuits and overheating.
Compared with traditional low-voltage energy storage systems, the high-voltage architecture reduces current transmission loss and provides stronger capability for powering high-load appliances such as central air conditioners, heat pumps, electric water heaters and multiple household appliances simultaneously.
With IP54 dustproof and waterproof protection, the HPIXP system supports more flexible installation environments including garages, sunrooms and covered outdoor areas.
Supporting both on-grid and off-grid operation modes, the system is compatible with mainstream residential photovoltaic systems and provides reliable backup power for areas with unstable electricity grids.
It is widely used in premium residential energy storage projects across Southeast Asia, Africa, the Middle East and Latin America.
2. Core Advantages
High-voltage Architecture for Whole-house High-power Loads
The HPIXP system adopts high-voltage battery architecture, reducing current transmission loss and improving energy efficiency.
It can support simultaneous operation of high-power household equipment including:
- Central air conditioning
- Heat pumps
- Electric water heaters
- Refrigerators
- Kitchen appliances
- Home entertainment systems
Compared with ordinary low-voltage residential batteries, it provides stronger whole-house power supply capability.
Modular Stackable Design & Flexible Capacity Expansion
The system consists of:
- 10KW hybrid inverter
- High-voltage control layer
- High-voltage battery modules
- Mobile base
Users can freely combine battery modules according to actual energy demand.
Additional battery modules can be added later to increase total storage capacity without replacing the complete system.
Premium Grade A LiFePO4 Battery Cells & 6000+ Cycles
The HPIXP system uses brand-new Grade A lithium iron phosphate cells.
Advantages include:
- ≥6000 charge-discharge cycles
- Stable long-term performance
- High thermal stability
- Low maintenance requirements
It provides reliable energy storage for long-term residential applications.
Intelligent BMS Multi-layer Safety Protection
The built-in Battery Management System continuously monitors:
- Voltage
- Current
- Temperature
- Battery status
Multiple protection functions ensure safe operation:
- Overcharge protection
- Over-discharge protection
- Short circuit protection
- Over-temperature protection
IP54 Protection for Flexible Installation
Unlike traditional IP20 indoor battery systems, HPIXP provides:
IP54 dustproof and waterproof protection
Suitable installation locations include:
- Garage
- Covered balcony
- Sunroom
- Semi-outdoor storage area
It solves the installation limitation problem of large residential energy storage systems.
Mobile Wheeled Base for Easy Relocation
The specially designed mobile base allows users to move the complete energy storage system easily.
It provides greater flexibility during:
- Home renovation
- Space adjustment
- System relocation
On-grid & Off-grid Dual Operating Modes
The HPIXP system supports:
Grid-connected Energy Management
- Solar self-consumption
- Battery charging
- Peak electricity cost reduction
- Excess electricity export
Off-grid Backup Operation
During grid failure, the system automatically switches to backup mode to maintain essential household power supply.
International Export Certifications
The HPIXP series complies with international safety and transportation requirements.
Certifications include:
- EN IEC standards
- MSDS
- UN38.3
Suitable for global residential energy storage markets.
3. Application Scenarios
1. Whole-house Backup Power for Luxury Villas
Large villas usually have higher electricity consumption and more high-power appliances.
The HPIXP high-voltage energy storage system provides stable backup power for:
- Central air conditioning
- Heat pumps
- Refrigerators
- Water heaters
- Lighting systems
It helps maintain normal household operation during grid outages.
2. Residential Solar Energy Storage with Grid Export
The HPIXP system works perfectly with rooftop photovoltaic systems.
During daytime:
Solar energy supplies household loads first.
Excess solar power can be:
- Stored in batteries
- Exported to the public grid
During nighttime or grid failure:
Stored energy supplies household electricity demand.
Related solution:
Residential Solar Energy Storage System
3. Peak-Valley Electricity Cost Optimization
For villas and large residences with high electricity bills, the system supports intelligent energy scheduling.
It can:
- Charge during low electricity price periods
- Discharge during peak price periods
Helping reduce long-term household electricity expenses.
4. Semi-outdoor Installation Energy Storage Solution
Thanks to IP54 protection, HPIXP is suitable for properties where indoor installation space is limited.
Recommended locations:
- Villa garages
- Covered terraces
- Utility rooms
- Sunrooms
5. Off-grid Power Supply for Remote Villas
For remote residences without stable grid connection, including:
- Mountain villas
- Island houses
- Rural detached homes
HPIXP can combine with solar systems to build an independent household power supply system.
6. Small Commercial & Agricultural Energy Storage
The high-voltage architecture also supports:
- Small workshops
- Farms
- Agricultural facilities
- Remote monitoring systems
4. Product Certifications
All HPIXP high-voltage energy storage systems meet international export requirements.
Certification:
- EN IEC 61000-6-3:2021
- EN IEC 61000-6-1:2019
- EN 61000-3-3:2013+A2:2012+AC:2022
- EN IEC 61000-3-2:2019+A1:2021
- MSDS
- UN38.3
5. Component Specifications
| Component Name | Product Dimension | Net Weight | Package Dimension |
|---|---|---|---|
| 10KW Inverter | 530×190×500mm | 20kg | 555×550×600mm |
| High-voltage Control Layer | 530×190×383mm | 13kg | 555×300×510mm |
| HPIXP-102.4V 50AH Battery Module | 530×190×383mm | 45kg | 555×300×510mm |
| Mobile Base | 530×190×60mm | 10kg | 760×295×110mm |
Note:
Users can freely configure inverter, high-voltage control unit, battery modules and mobile base according to required storage capacity.
6. Standard Accessories
Each HPIXP high-voltage stackable energy storage system includes:
- Inverter accessories
- User manual & certificate of conformity
- Wooden case packaging
7. Why Choose HPIXP High-voltage Stackable Energy Storage System?
The HPIXP high-voltage stackable energy storage system is developed specifically for customers requiring whole-house backup power, high-power load support and flexible installation options.
Compared with low-voltage residential batteries, HPIXP provides:
- Higher power output capability
- Lower transmission loss
- Better support for large household loads
- IP54 installation flexibility
- Modular capacity expansion
It is an ideal villa energy storage solution for luxury homes, detached houses and premium residential projects.
The system can work with residential solar PV systems for daily energy management and provide reliable off-grid backup power during electricity failures.
We support:
- Global wholesale supply
- OEM & ODM customization
- Technical support
- After-sales service
For bulk quotation, sample testing or technical consultation, please contact our professional sales team.
Related Recommended Products
XPC Low-voltage Stackable All-in-One Energy Storage System
Modular low-voltage household energy storage solution for apartments and medium-sized homes.
XPF Low-voltage All-in-One Energy Storage System
Integrated inverter and battery system designed for simple installation in small and medium households.
XPB Wall-mounted LiFePO4 Battery
Space-saving wall-mounted residential energy storage battery.
XPA Rack-mounted LiFePO4 Battery
Rack-mounted battery solution for cabinet installation and customized energy storage projects.
